Technology Instructions for ARCH 206   Turn on the projector by using the small Crestron wall touch panel. The power button is in the lower right.    You can use your device with a wired connection or wirelessly via Air Media. To use the wired connection, plug the provided HDMI cable into your device. You may need an adapter if the device only has USB-C ports.    To use the wireless connection, select the Air Media icon on the touch panel. An IP address will be visible in the lower left hand corner of the projection (“10.103.___.___”). Enter this number into the web address area of Chrome or Firefox. This brings you to a page to download the Air Media software. Once the software is downloaded and opened, a 4-digit number will appear on the Air Media projection. Enter this number into the box that pops up on your device. This connects the device image/sound to the projector.  If you have a mac laptop, follow the same directions. After downloading the software, the Air Media with corresponding room number will appear as a mirroring option. Select that to display your device.    When class is over, please turn the system off from the power button on the touch panel.  

Technology Instructions for ARCH 203   Turn on the TV monitor by using the small Crestron wall touch panel. The power button is in the lower right.    You can use your device with a wired connection or wirelessly via Air Media. To use the wired connection, plug the provided HDMI cable into your device. You may need an adapter if the device only has USB-C ports.    To use the wireless connection, select the Air Media icon on the touch panel. An IP address will be visible in the lower left hand corner of the TV monitor (“10.103.___.___”). Enter this number into the web address area of Chrome or Firefox. This brings you to a page to download the Air Media software. Once the software is downloaded and opened, a 4-digit number will appear on the TV monitor. Enter this number into the box that pops up on your device. This connects the device image/sound to the monitor.  If you have a mac laptop, follow the same directions. After downloading the software, the Air Media with corresponding room number will appear as a mirroring option. Select that to display your device.    When class is over, please turn the system off from the power button on the touch panel.  

Table of Content Turning System ON and OFF Connecting a Device Need More Help? Turning System ON and OFF To Turn On Turn the TV on using the Samsung remote control, or the power button on the bottom or back right of the monitor. If using the attached PC, please make sure it is also on. To switch between sources, use the "source" button in the middle of the remote. The available sources are: PC- Desktop PC Laptop HDMI -HDMI Connection To Turn Off *Note: Please make sure to turn off the system before leaving the room. Press the power button on the Samsung remote control, or the power button on the bottom or back right of the monitor and room PC. Connecting a Device Personal Laptop To use your own device, plug it into the available HDMI cable. If your device does not have an HDMI port, adapters are available for check out at the MediaTech desk, located by the main entrance of the University Library. Need More Help? If you have any questions or need assistance, please contact the IT help desk. Phone: 401-254-6363 (option 1) Website: mediatech.rwu.edu Email: mediatech@rwu.edu

Table of Content Turning System ON and OFF Connecting a Device Using The Polycom For Zoom Need More Help? Turning System ON and OFF To Turn On Turn the TV on using the Samsung remote control, or the power button on the bottom of the TV If the TV display nothing make sure the PC on the back of the TV is on (Picture of TV) To switch between sources, use the "source" button in the middle of the remote. The available sources are: PC - Desktop PC Laptop HDMI - HDMI Connection (Picture of Remote) To Turn Off *Note: Please make sure to turn off the system before leaving the room. Press the power button on the Samsung remote control Connecting a Device Personal Laptop To use your own device, plug it into the available HDMI cable. If your device does not have an HDMI port, adapters are available for check out at the Media Tech desk, located by the main entrance of the University Library. Using the Polycom for Zoom When using Zoom on the Room PC, please follow the instructions below. Access Zoom either by clicking the desktop icon or via Bridges. Login using your RWU Microsoft Credentials. Once open, go to Audio Settings in the lower left and select Echo Cancelling Speakerphone (Polycom Studio). We recommend doing a mic and speaker test via the Zoom Settings. Need More Help? If you have any questions or need assistance, please contact the IT help desk. Phone: 401-254-6363 (option 1) Website: mediatech.rwu.edu Email: mediatech@rwu.edu

Table of Content Turning System ON and OFF Connecting a Device Need Tech Help? Turning System ON and OFF To Turn On Tap the touch screen to turn it on. In the Arch thesis room, you have the option of using just one projector/monitor, or both 104 and 105 rooms if using the whole space for one meeting. Select "Single Room" or "Combined" Single Room Single room mode allows you to select laptop connection or wireless AirMedia connection, and route it to either the projector and/or the TV monitor Combined Room Combined room mode allows you to send the signal from the USB-C cable or AirMedia in either 104 or 105 to any/all projectors and monitors in either room. To Turn Off *Note: Please make sure to turn off the system before leaving the room. Press the exit button on the touch panel. Then, confirm that you want to power the system down. Connecting a Device Personal Laptop Plug in your device using the USB-C cable in the room. Once the laptop is plugged in, select "Single Room" or "Combined Room." Single will control one-half of the space. Combined will control both sides. When using combined, your laptop only needs to be connected to one side of the room, then, using the touch panel, you can send the signal to both projectors/displays. AirMedia For AirMedia, connect the AirMedia adapter to your USB-C port. Then select "AirMedia" on the touch panel and either the projector or the display. If the adapter is not available, open Chrome or another browser and type in the IP address at the bottom of the screen (10.103...) Going to that page on your laptop will allow you to then connect to AirMedia using a 4-digit code that appears on the selected TV monitors and projectors. Need Tech Help? If you have any questions or need assistance, please contact the IT help desk. Phone: 401-254-6363 (option 1) Website: mediatech.rwu.edu Email: mediatech@rwu.edu

Quick Guide - Arch Thesis Rooms Arch 104/105 Classroom Guide Technology Set-up: Laptop connection, Air Media, Mounted TVs, Divide/Combine Projection Table of Content Turning System ON and OFF Connecting Laptop Need Tech Help? Turning System ON and OFF In Arch Thesis you have the option of using just one projector/monitor, or both 104 and 105 rooms if using the whole space for one meeting. Select "Single Room" or "Combined." Single Room mode allows you to select laptop connection or wireless Air Media connection, and route it to either the projector and/or TV monitor. Combined mode allows you to send the signal from the USB-C cable or Air Media in either 104 or 105, to any and all projectors/monitors in either room. To shut down the system press "exit" in the top right and then confirm that you want to power down. Connecting Laptop Plug in your device using the USB-C cable in the room. Once the laptop is plugged in, select Single room or Combined room. Single will only control one-half of the space. Combined will control both sides When using combined, your laptop only needs to be connected to one side of the room, then using the touch panel, you can send the signal to both projectors and/or displays. For AirMedia, connect the AirMedia adapter to your USB-C port than select AirMedia on the touch panel and either the projector or the display. If the adapter isn't available, open Chrome or another browser and type in the IP address at the bottom of the screen (10.103...). Going to that page on your laptop will allow you to then connect to AirMedia using a 4 digit code that appears on the selected TV monitors and projectors. Need Tech Help? If you have any questions or need assistance, please contact the IT help desk. Phone: 401-254-6363 (option 1) Website: mediatech.rwu.edu Email: mediatech@rwu.edu