RWU MediaTech Portal

Login

RWU Wireless Connection Guide - Android

Modified on: Sat, Sep 7 2024 1:13 PM


 

How to connect to the Faculty&Staff network on Android


1.     Find and open the Settings app on the device

Settings on Google Pixel/Android phone.

2.     Open the “Network and Internet” section.

Android Settings. Network & Internet setting is highlighted with a light gray hue.

3.     Tap on the “Internet” menu towards the top of the screen.

Network & Internet settings. The Internet option is highlighted with a gray hue.

4.     Open the “Faculty&Staff” Wi-Fi settings.

Network options in the Internet Settings. The Faculty and Staff Network is highlighted with a gray hue.


5.     If you are faculty, enter “domain\” followed by your school username in the “Identity” field. The domain “rwu.edu


Make sure that the following options are set as listed below: 

-         EAP Method = PEAP

-         Phase 2 Authentication = MSCHAPV2

-         CA Certificate = Use system certificates

-         Online Certificate Status = Do not verify

 

(The following are in "Advanced" dropdown menu at the bottom)

-         Metered = Detect automatically

-         Proxy = None

-         IP settings = DHCP

-         Privacy = Use randomized MAC (default)

The advanced settings should default to these options.

Faculty and Staff Network authentication.


6.     After you have entered your username and password, the “Connect” button should light up at the bottom, and you have successfully logged on to the network.

Was this answer helpful?