Table of Content

• Turning System ON and OFF
• Connecting a Device
• Need More Help?

Turning System ON and OFF

Turning ON

• Turn the projector ON by using the small Creston wall touch panel and pressing the POWER button on the lower right.
• Once you choose your desired source on the wall panel, the screen will come down and the projection will begin.
• The available sources are:
  • Laptop - HDMI Connection
  • AirMedia - Wireless Connection

Turning OFF

*Please turn off the system before leaving the classroom.

• Turn the projector OFF by using the small Creston wall touch panel and pressing the POWER button.

Connecting a Device

Personal Laptop

• To project using your laptop, use the available HDMI cable and plug it into the corresponding port.
• If your laptop does not have an HDMI port, you may borrow one from the Media Tech Help Desk, located near the main doors of the University Library.
• Select LAPTOP as your source on the wall panel.

AirMedia

• To project using AirMedia, select the AIRMEDIA source on the wall panel.
• An IP address will display in the lower left hand corner of the projection ("10.103.___.___")
• Enter this into your web address bar of Chrome or Firefox. This will bring you to a page to download the AirMedia software.
• Once the software is downloaded and opened,  a 4-digit code will appear on the projection. Type this number into the box that appears on your device. This will connect the device image and sound to the projector.

*If using a Mac Laptop, follow the same directions. After downloading the software, the AirMedia with the corresponding room number will appear as a mirroring option. Select that to display your device.

Need More Help?

If you have any questions or need assistance, please contact the IT help desk.

• Phone: 401-254-6363 (option 1)
• Website: mediatech.rwu.edu
• Email: mediatech@rwu.edu